FX/Loopers

The MOOER GE150 is comes packed with everything you need to explore new guitar tones and sounds. In addition to 55 High-quality amp models the GE150 has 151 different effects including distortion, reverb, chorus, octave and many more.

Cerberus is a multi-function effect pedal with delay, reverb, and modulation effects. It offers analog overdrive & distortion, digital effects, and MIDI control for easy integration with rack processors and guitar effects software. The pedal features 60's Delay, 70's Delay, and 80's Delay, with TAP TEMPO for infinite feedback and run-away/oscillation.

Cry Baby GCB95 Wah Pedal The list of who has used the Cry Baby Wah is too long to list here so how about we leave it at this... David Gilmour, Jimi Hendrix, Tom Morello, Kirk Hammett, Slash, Joe Bonamassa and Eddie Van Halen. Need we say more? If you only get one pedal... get this one.

• The Original Wah
• Equipped with the legendary Red Fasel inductor
• 100 k Hot Potz potentiometer to ensure fast response to the wah effect
• True Hardwire bypass
• Robust and heavy duty metal housing

Fender Pugilist Distortion Pedal Dual Gain engine distortion giving you complete control of your distortion from subtle to extreme 

• Controls: Tone A, Drive A, Tone B, Drive B, Blend (A/B), Blend/Series Toggle,
• Bass Boost Toggle (On/Off), Output Level, Bypass Footswitch
• Inputs: 1 x ¼” Instrument
• Outputs: 1 x ¼” Instrument

NMP-2 by NUX | Dual Foot-Switch 

NMP-2 Dual Footswitch. NUX NMP-2 is a universal dual switch controller with OPEN, CLOSE and LATCH modes, and it's a combination of momentary and latch type controllers, you can use it in both ways. You can connect to any amplifier or pedal with 1/4" jack controller input, and it's also compatible to use with keyboards, synthesizers etc. Just make sure the equipment must have the global control input and NMP-2 will work perfectly.

NUX NMP-2 is also works with: NUX Loop Core Deluxe, NUX JTC Drum & Loop PRO and NUX Cerberus.

MG30 Modeler and Multi Effects by NUX | Hundreds of Effects | Large LCD Screen | Over 30 IR's Built In

With 2 powerful NXP® RT processors, MG-30 drives 1024 samples Impulse Response resolution with ultra-low system latency to give you tight and fast response.

Premium 32-bit 2-channel AD/DA converters realize "high quality sound performance". MG-30 has super wide dynamic range ~ 110dB !

Adapter for all NUX Pedals 9V 500mA center negative. Save your batteries!! The ACD-006A is the ideal power supply for ALL NUX pedals. New NUX ACD-006A switching power adapter is highly efficient to use with guitar pedals. It has a switching regulator in order to control the conversion of electrical power. Stabilizing the voltage is very important for the pedal sound also.

MG300 Modeling Guitar Processor by NUX Features

• Category : Multi effects
• Dimensions (mm) : 230 x 160 x 58
• Display : LCD screen
• EQ : 3 channels
• Expression pedal : Yes
• Format : Pedalboard
• Inputs : USB, Jack, Auxiliary
• Microphone Simulator : 4
• Modelling number : 24
• Number of effects : 100
• Outputs : Amp / headphone jack
• Power supply : DC 9 V
• Power supply included : Yes
• Preset number : 72
• Settings  level, master, select
• Simultaneous effects : 10
• Switch : 2 foot switches
• Technology : Digital
• User memories number : 36
• Weight (kg) : 754 g

A 4-way momentary footswitch for CODE. Switches one to three allow you to recall stored presets and switch four scrolls through all the available presets. This footswitch has indicator lights so that you can easily see which setting your working with.

The iconic MXR Phase 90 defined the sound of Van Halen and has been on the pedal boards of rock gods since its launch in the 1970's. Variable speed modulation, rugged construction and the classic phaser sound in a little orange box!

The MTG:LA is the perfect addition to any guitar rig for a player looking for that genuine warm analogue distortion sound.

In an age of digital technology, there is still something special about a genuine analog distortion pedal like the MTG:LA from Fender. Few things are as satisfying as the real-deal distortion sound of glowing glass—vacuum tubes are responsible for the tones you fell in love with. MTG:LA® is a tube distortion pedal based around a genuine, U.S.-made NOS 6205 preamp tube. Tone, Bass, Treble and Tight controls make it easy to shape your sound, while the distinctly Fender footswitchable Boost adds Volume, Gain or both to make your solos stand out.

Fireman Distortion. FIREMAN is based on the legendary amplifier builder's famous distortion pedal. It's a very amp-like distortion pedal with Modern Brown Sound. We designed it with 2 independent VOLUME, GAIN control knobs to fit rhythm and solo applications. FIREMAN offers a True-bypass / Buffer-bypass toggle switch, and a 9V / 18V toggle switch. The 18V position doubles the working voltage inside to give you wider dynamic range. 

The NUX VERB CORE DELUXE MNU VERBCORE-DLX is a reverb pedal with 8 different types including Room, Hall, Plate, Damp, Shim, Spring, Tre-Verb and Mod Verb. You can select the reverb type by using the Type knob.The USB-C port is for firmware updates. Connect the USB cable to the computer and press and hold the foot switch to turn on the device and  enter  DFU (Device Firmware Update) mode. After connecting, you can update the firmware  using DFU update software.

MXR M169 Carbon Copy Analog Delay Specifications

• Category : Delay
• Format : Pedal
• Inputs : Jack
• Outputs : Jack
• Power supply : 9V battery, DC 9 V
• Power supply included : No
• Switch : Mod
• Technology : Analog
• True bypass : Yes
• Controls: Regen, Mix, Delay (from 20ms to 600ms)
• Modulation switch (2 internal trim pots for Width and Rate adjustment)
• True Hard Bypass

Horseman Overdrive Pedal by NUX Specifications

• Category : Overdrive
• Dimensions (mm) : 94 x 51 x 53
• Display : Led
• Format : Pedal
• Inputs : Instrument jack
• Modelling number : 2
• Number of effects : 1
• Outputs : Jack amp
• Power supply : DC 9 V
• Settings : Treble, Output
• Switch : On/Off
• Technology : Analog
• Weight (kg) : 174 kg

Atlantic Delay & Reverb. The NUX Atlantic pedal covers several Delay and Reverb types that are very representative in history: 60's Tape-Echo, 70's BBD Analog Delay, 80's Digital Delay, Spring Reverb, Plate Reverb and Hall Reverb.

The latest algorithms with Core Image Technology from NUX offers you not only these classic effects, but also modern Shimmer and Freeze effects that inspire you to create dreamy musical ideas! Its patented Smart TAP function automatically understands if you want to turn on/off the delay or tap in the tempo. 

Tape Core Deluxe Pedal by NUX | Tape Echo Effect Specifications

• Effects: 7 repro head combination types and Sound on Sound type
• Preset: 1
• Nominal Input Level: -20 dBu (GUITAR) +3 dBu (Max.)
• Input Impedance: 1 MΩ
• Nominal Output Level: -20 dBu (GUITAR) +3 dBu (Max.)
• Output Impedance: 1 kΩ 0Ω (BYPASS)
• Residual Noise Level: -93 dBu ( MIN.)
• Current Draw: 103mA
• Power Supply: 9V Battery, or AC adaptor to the DC 9V (optional NUX ACD-006A)
• Dimensions: 122mm (L) x 72mm (W) x 47mm (H)
• Weight: 270g

MXR M222 Talk Box - The Talk Box is a classic effect which you can hear it on some of the greatest songs ever recorded, across genres and time, from funk and '70s rock to hard rock and metal. Its unique, highly expressive character is instantly recognisable. 

Brownie Distortion by NUX | Mini Classic Distortion Pedal Effect for Guitar Specifications

• Input resistance: 470K ohm
• Output resistance: 100 ohm
• Power supply: Standard 9V, (Power supply not included)
• Weight: 174
• Dimensions: 94(Length) × 51(Width) × 53(Height)

With auto tempo recognition, the HOOK Drum & Loop (NDL-3) is a compact looper pedal. Just record a loop of a phrase, then sync it with a drum beat. Alternatively, you may play the drum beat with the accompanying Smart Tap Tempo and begin recording the phrase loop. The MNU HOOK-DRUM&LOOPMINI is easy to use and intuitive. The USB-C port is for firmware updates. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software.

Loop Pedal. Loop Core Deluxe allows you to record loop phrases up to 8 hours with unlimited layers in 24-bit high-resolution audio quality into 99 saved memories. 

The Edge delay (NDD-3) is a little delay pedal that offers three distinct delay styles, including tape echo, analog delay, and phi digital delay. Holding down the footswitch while pressing the switch will change the delay type. 

The Swollen Pickle Jumbo Fuzz MkIIS gives you the same beefy high gain fuzz as the full-sized MkII but in a smaller package to save room on your precious pedalboard! Twist the Sustain control and you’re taken from mild crunch to full on fuzz armageddon mode! 

NUX | Time Core Deluxe MKII | Delay & Looper Pedal Effect | 7 Different Types And a Phrase

The NUX Time Core Deluxe MKII is a delay pedal with 7 different types and a phrase looper; including ΦPhi Digital Delay, Analog Delay, Modulation Delay, Tape Echo, Pan Delay, Verb Delay, Reverse Delay and Sound On Sound. You can switch the delay type by using the Type rotary switch.

Varta 9V Battery - Long Life Power for your Pedals and Active Pickups

Pedal Tuner. Very sensitive chromatic tuning mode with a wide range.

 - Dimensions (mm) : 122 x 72 x 47 - Weight (kg) : 235 g

Pedal Toppers by NUX | More comfort and stability on stage and in the studio | NST1

Pedal Topper. NUX Pedal Topper is a stomp box foot switch cap, offers you more stable and cozy foot experience during the performance. You don't need to think twice before you hit the switch, highly recommended for Looper pedals, TAP TEMPO controls or anything you want to mark on your pedal board and important to hit right on time! It could fit with common 3/8"(10mm) 3-PDT Switches of effect pedals, the soft surface design increases comfort and accuracy.

Very cool colorful NUX logo!

Cry Baby Junior Wah Pedal by Dunlop | MDU CBJ95

Perfectly sized for the most popular pedalboards. The Dunlop Wah pedal range offers a wide choice of legendary sounds, including the Cry Baby, but also Signature pedals, the famous 535Q, etc.

Steel Singer Overdrive Pedal by NUX Specifications:

• Category: Overdrive
• Dimensions (mm): 121 x 77 x 48
• Format: pedal
• Inputs: Jack
• Exit: Jack
• Power supply: 9V battery, DC 9V
• Settings: Volume, Gain, Filter
• Switch: On/Off
• Technology: Analog
• True bypass: Yes
• Weight (kg): 230 g

The BAIO (Box All In One) by Eko Guitars is a complete portable multi-effects pedal, perfect for your guitar. With its 9 built-in preamp types, 8 IRs and integrated effects, you will be able to fully control your sound. Try it as an audio interface with your pc or smartphone and use the BT to play along with your backing tracks.

Featuring 16cm in length, just 6cm in width and 260g in weight, BAIO is the all-in-one multi-effect system capable of offering all the features and functions essential to the modern guitarist. Easy to carry and super resistant thanks to its metal chassis, it allows total control of your sound.

Recto Distortion by NUX |Distortion Pedal Effect 

• Category - Distorsion
• Dimensions (mm) - 121 x 77 x 48
• EQ - 2 channels
• Format - Pedal
• Inputs - Jack
• Outputs - Jack
• Power supply - 9V battery, DC 9 V
• Power supply included - Yes
• Settings - Master Volume, Treble, Bass
• Switch - On/Off
• Technology - Analog
• True bypass - Yes
• Weight (kg) - 230 g

Analog Delay Effect by NUX | Analog Delay Pedal Specifications

• Category : Delay
• Dimensions (mm) : 121 x 77 x 48
• Display : Led
• Format : Pedal
• Inputs : Jack
• Number of effects : 1
• Outputs : Jack
• Power supply : 9V battery, DC 9 V
• Power supply included : Yes
• Settings : blend, repeats, time
• Switch : On/Off
• Technology : Analog
• True bypass : Yes
• Weight (kg) : 230 g

The NUX Voodoo Vibe is a modern DSP technology pedal inspired by the Dunlop® Uni-Vibe®, which combines analog and digital sound. It can now be powered by 9V and features Smart Tap Tempo functionality. NUX Effects' technology allows for easy improvement in Chorus mode without volume drop concerns, while maintaining positive energy and analog sound. The footswitch allows for sporadic firmware updates, and the device can boot up and enter DFU (Device Firmware Updating) mode. The product page provides the relevant firmware and update guide.

NUX Loop Core Stereo | Guitar Looper Pedal | Specifications:

• Sampling Frequency - 44.1KHz
• A/D Converter - 16bit
• Signal Processing - 16bit
• Frequency Response - 20Hz - 20KHz
• INPUT Impedance - 1MΩ
• AUX IN Impedance - 33KΩ
• OUTPUT Impedance - 10KΩ
• Display - LED
• Power - 9V DC Negative Tip (9V Battery, ACD-008A Adapter)
• Dimensions - 122(L) x 64(W) x 48(H) mm
• Weight - 265g

In order to provide you with professional-quality tone while maintaining the integrity of the original signal, Ashdown bass effects were particularly created.

The Pro-Drive allows you control over the amount of amplification and the tone of your drive for those who prefer a pick to fingers or who dig in like the greats. The Tone control, which gives you control over the instrument's dynamic range, functions as predicted, letting you choose between a dull, rumbling thunder and a screaming banshee. The output of the pedal may be balanced against the sound of your clean instrument when combined with the output control to create the ideal step drive tone.

The NUX Sculpture Compressor pedal maintains a constant output volume level and enhances top and bottom edge sharpness on signals. By elevating fading notes, it clarifies loud notes and lengthens sustain. The pedal additionally strengthens the effects chain's signal structure. There are two clip modes available: Clean Mode (with a broad range of limits) and Clip Mode (with Clip Light on). For single coil system guitars, Clean mode is appropriate, whilst Clip Mode is ideal for tightening the sound and making up for low output.

By adjusting the dry/wet compressor effect level on the processed signal using the Blend Knob, you may achieve the ideal balance between clipped frequencies and long sustain. By turning on the power and holding down the footswitch, you can switch between bypass and buffer modes because the buffer bypass mode is incorporated. All things considered, the NUX Sculpture Compressor pedal is a flexible tool for generating a strong and diverse sound on your guitar.

The Nux SixtyFive is a pedal that offers aggressive overdrive tones, based on the BlackPanel 65 tube amps. Its analog circuit, based on a JRC4558 gain stage, accurately recreates the saturated sound of Blues/Rock guitars. The pedal features four knobs for customization, including level and gain knobs, bass and treble dials, and a trimpot potentiometer for fine-tuning saturation. The pedal is true-bypass to conserve incoming signal and can be turned on or off with the footswitch.