Please sign in so that we can notify you about a reply
Arturia MiniFuse Recording Pack| Podcast Bundle | Microphone CM1 | Headphones EF1 | XLR Cable | MiniFuse2 | Black
Whoever you are, whether you're a beginner musician, content creator, producer with limited space, or musician on a budget, enjoy an inexpensive, easy-to-use, professional-grade recording bundle for vocals, instruments, and any audio you require.
Arturia MiniFuse 2 Key Features
- 2 x combo Mic/Inst/Line XLR Inputs with 48V phantom power
- 2 x 1/4" TRS balanced line outputs with volume control
- 1 x stereo headphone output with volume control
- Direct/USB Monitor knob control Direct Monitor Mono switch
- 1 x 5-pin MIDI input 1 x 5-pin MIDI output
- 1 x USB2 type A hub (250mA max.)
- 1 x stereo virtual loopback channel
- USB-C interface compatible with PC & Mac, fully USB 2.0 compatible
MiniFuse2
• 2x Inputs
• 2x Outputs
• 1x Headphone
• 1x MIDI I/O
Line Inputs
• Input impedance: 16kΩ
• Maximum input level: +22dBu
• Gain range: 56dB
• Frequency response 20Hz to 20kHz: +/-0.05dB (min gain)
• Dynamic range: 110dB typical (A-weighted)
• THD+N @ 1kHz: -100dB typical (un-weighted)
Instrument Input
• Input impedance: 1MΩ on Tip
• Maximum input level: +11.5dBu
• Gain range: 56dB
• Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
• Dynamic range: 110dB typical (A-weighted)
• THD+N @ 1kHz: -91dB typical (un-weighted)
Microphone Preamps
• Input impedance: 2.5kΩ
• Maximum input level: +9dBu
• Gain range: 56dB
• Equivalent Input Noise (EIN): -129dB typical (A-weighted)
• Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
• Dynamic range: 110dB typical (A-weighted)
• THD+N @ 1kHz: -100dB typical (un-weighted)
Speakers
• Output impedance: 94Ω
• Maximum output level: +12dBu
• Frequency response 20-20kHz: +/-0.09dB
• Dynamic range: 107.5dB typical (A-weighted)
• THD+N @ 1kHz: -101dB typical (un-weighted)
Supported Sample rates
- 44.1kHz, 48kHz, 88.2 kHz,
- 96kHz, 176.4kHz,192 kHz
Microphone
CM1 cardioid mic, including shockmount & pop filter
- Capsule: Condenser (Cardoid)
- Sensitivity: -36 dB ‡3 dB (0 dB = 1 V/Pa at 1 kHz)
- Frequency response: 20 Hz to 20kHz
- Impedence: 110Ω +/-30% (at 1 kHz)
- Recommended Load impedence: > 1kΩ
- Equivalent Noise Level: < 20dBA (IEC 581-5)
- S/N Ratio: 74 dB
- Maximum SPL: 130 dB
- Power requirement: 48V phantom supply
- Current: 3.2 mA
Headphones
EF1 closed-back, low-noise design, including adapter
- Type: Closed-back
- Drive diameter: 40 mm
- Impedence: 32Ω
- Sensitivity: 99 dB +/- 3dB
- Frequency response: 10Hz to 20kHz
- Max. power rating: 1.2W
- Cable length: 3m
- Weight: 260g with cable
XLR cable
- 3m length for easy mic setup
The software from Arturia, which is well-known, is included with MiniFuse2 and includes everything you need to start recording:
- Ableton Live Lite - Compose, record, perform, and produce anything.
- Arturia Analog Lab Intro - Instant access to 500 presets from V Collection instruments.
- Arturia FX - 4 incredible emulations of vintage studio FX, from chorus to plate reverb.
- Auto-Tune Unlimited 3-months free subscription - The industry’s favorite voice tuning plugin.
- Native Instruments Guitar Rig 6 LE - The benchmark for mix-ready guitar tones.
Measurements:
- Dimensions (mm) : 489 x 256 x 98
- Weight (kg) : 2.35 kg
No posts found